Produkty

  1. Produkty
  2. IP-A1PA12
IP-A1PA12

IP-A1PA12

IP Power Amplifier

Combine the Strengths of the IP and the Analogue Audio World
Plug & Receive: Based on open standards, the IP-A1PA12 IP power amplifier plugs right into standard IP networks and can be easily integrated into your video management system (VMS) or SIP-based communication system. A single standard network cable provides both connectivity and power.
The IP-A1PA12 IP power amplifier can integrate analogue receiving devices into your network as e.g., conventional high impedance speakers or local PA systems. A wide variety of high impedance speakers can therefore be turned into IP speakers, multiple at the same time using a single IP-A1PA12. Furthermore, PA or BGM systems without SIP or ONVIF* interface can now be integrated into your network solutions.

Flexible Group Paging: The IP power amplifier can also be addressed via multicast, enabling audio paging into groups or larger zones of IP audio devices simultaneously.

Application Examples:
Seminar rooms with a requirement for multiple loudspeakers can be easily integrated into VMS or SIP telephone systems with higher cost-efficiency compared to setups consisting entirely of IP speakers. Retail chains with existing local PA/BGM systems can be integrated into IP solutions providing network control and centralized management opportunities.

  • Receive SIP audio, ONVIF* audio and multicast (up to 20 addresses)
  • API for HTTP command reception
  • Local broadcast using internal audio files or local audio source
  • Different playback programs (repeat, duration, weekly timer)
  • 12 W built-in amplifier
  • 1 speaker output (100 / 70/25 V), 1 line audio output
  • 1 external amplifier input (100/70/25 V)
  • 1 audio input (line/mic and phantom power selectable)
  • 2 control inputs, 1 mute control input and 1 control output
  • PoE+ -powered

*ONVIF is a registered trademark of ONVIF Inc.



Ulotka
  • Specyfikacje
  • Przykład aplikacji:
  • Akcesoria
  • Opis
  • Pobierz
Specyfikacje
Specyfikacje produktu:
IP-A1PA12
Pobór mocy

25 W (rated output)
Pasmo przenoszenia

100 Hz - 20 kHz
Moc znamionowa

12 W
Network I/F

1x 100BASE-TX (RJ45)
Protokół sieciowy

TCP/IP, UDP, HTTP, RTP, RTSP, RTCP, ARP, ICMP, IGMPv3, NTP, SIP (RFC3261)
Wejście audio

1x line/mic (balanced, phantom power, terminal block)
1x 100 V (terminal block)
Wyjście audio

1x line (balanced, terminal block)
Wyjścia audio

1x 100 V (terminal block)
Wejścia sterujące

2x no-voltage make contact (terminal block)
1x mute control (24 V, terminal block)
Wyjścia sterujące

1x open collector (terminal block)
Zakres temperatury pracy

−30 °C to +55 °C
Wykonanie

Stal, Czarny
Wymiary

210 x 44 x 81.5 mm (W x H x D)
Waga

940 g
Zasilanie

PoE+
Przykład aplikacji:
Akcesoria
Opis
Pobierz